Networking Screens
267
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
A Screens Reference
Common Fields See Common Data Module Fields (256) for descriptions of fields on this screen that
are not listed below.
Physical Channel A number used by the switch software to identify the physical channel.
Maintenance Extension The extension used to perform maintenance functions on the standby physical
channel in a duplicated system. This is the extension specified on the dial plan. The
standby remote loop around tests fail if this field is not administered.
Abbreviated Dialing
List 1
Specifies the type of abbreviated dialing list.
Note: See Administrator’s Guide, 555-233-502, for detailed information on
abbreviated dialing.
Special Dialing Option Identifies the type of dialing when this data module originates calls.
Valid Value Usage
A 2-digit
number equal to
the link number
entered on this
screen.
A multi-carrier cabinet system supports the use of two
Processor Interface circuit packs, the first circuit pack
(mounted in Control Carrier A) supports physical channels or
links 01 through 04; the second (mounted in Control Carrier
A) supports physical channels or links 05 through 08. A
single-carrier cabinet system supports one Processor Interface
circuit pack and physical channels or links 01 through 04 only.
Valid Value Usage
s (system)
g (group)
p (personal)
e (enhanced)
blank
If g or p is entered, a group number or personal list number
also is required. Entry in this field supports Data Hot Line.
This field can be left blank.
Valid Value Usage
hot-line, default, or
blank.
Leave blank for regular (normal) keyboard dialing.