Lucent Technologies Release 8.2 Server User Manual


 
Switch-Node 1 Administration
219
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
4 Networking Example
page 2
Data Modules
x.25 data module
change node names
Page 2 of 6
NODE NAMES
Name IP Address Name IP Address
1.ppp14________ __
192.168.200.12_ 17. _______________ ___.___.___.___
2.ppp41____
192.168.200.14_ 18. _______________ ___.___.___.___
3.CMS_____________ 192.168.201.10_ 19. _______________ ___.___.___.___
4.router
__________ 192.168.200.1__ 20. _______________ ___.___.___.___
5.ethernet1_____
__ 192.168.200.11_
:
16.
add data-module 1992
Page 1 of 2
DATA MODULE
Data Extension: 1992
Name: x.25 on link 2 to node 2
Type: x.25 Remote Loop-Around Test? n
Port: 01C0101 COR: 1 Destination Number: external
Baud Rate: 9600_____ TN: 1 Establish Connection? n
Endpoint Type: adjunct Connected Data Module: 1900_
Link: 2_ DTE/DCE: dte Error Logging? n
Enable Link: n
Permanent Virtual Circuit? y Highest PVC Logical Channel: 64
Switched Virtual Circuit? n