Filter
Top Products
Configuration 4: R8csi <—ISDN—> R8si Gateway
<—ppp—> R8csi
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
130
Destination
Node
Name of the far-end node for this channel. This must be a name
entered on the Node Names screen. For ppp connections, it must
match the Destination Node Name entered on the ppp Data
Module screen.
Destination
Port
A value of 0 allows any available interface channel on the
destination node to be used for this connection. The Interface
Channel number for this connection on the Switch-3 Processor
Channel screen must also be set to 0.
Session -
Local
The Local and Remote Session numbers can be any value
between 1 and 256 (si model) or 384 (r model), but they must be
consistent between endpoints. For each connection, the Local
Session number on this switch must equal the Remote Session
number on the remote switch and vice versa.
It is allowed, and sometimes convenient, to use the same number
for the Local and Remote Session numbers. It is allowed, but not
recommended, to use the same Session numbers for two or more
connections.
Session -
Remote
Mach ID Destination switch ID identified on the dial plan of the
destination switch.
Processor Channel 14: (Gateway between Switch 2 and Switch 3)
Enable Set to y.
Appl. Set to gateway for conversion between ISDN and TCP/IP.
Mode Node-1 is the “server” for this session. Set node-3 to “client”
(c).
Interface Link This must match the link number assigned on the node- 1 data
module screen.
Interface Chan For TCP/IP, interface channel numbers are in the range 5000 –
64500.
The recommended values are: 5001 for CMS, 5002 for Intuity
AUDIX, and 5003 for DCS connections that are not gateways.
These three values should be reused for multiple instances of
these applications; for example, if there are two Intuity
AUDIX’s, use 5002 for both; or if there are four DEFINITY
ECS’s, use 5003 for all four. The combination of Link, Interface
Channel, and Mach ID must be unique.
The recommended values for gateway switches is 6001–6099.
The interface channel number must be unique for each gateway.
This number must match the Destination Port number on the
node-3 Processor Channel screen.
Field Conditions/Comments
2 of 3