Lucent Technologies Release 8.2 Server User Manual


 
Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)
<—ethernet—> R8si
171
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
3 C-LAN Administration
Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs) <—ethernet—> R8si
In this configuration, a DEFINITY ECS R8r acts as a gateway between two other
nodes — one connected via ppp to an R8csi and the other via ethernet to another R8si.
This configuration is the same as configuration 5A except that Switch 1 has two
C-LAN circuit packs instead of one. One C-LAN handles the ppp connection and the
other handles the ethernet connection.
Task Summary
The following tasks need to be completed for Switch 1, Switch 2, and Switch 3:
1 Review checklist
2 Switch 1 administration
a Assign node names
b Assign link to (via a data module) to node-2
c Assign link to (via a data module) to the LAN
d Assign link (via a data module) from C-LAN(a) to C-LAN(b)
e Assign link (via a data module) from C-LAN(b) to C-LAN(a)
f Assign processor channels
g Assign IP Route: C-LAN(a) to node-3
h Assign IP Route: C-LAN(b) to node-2
3 Switch 2 administration
a Enable bus bridge connectivity
b Assign node names
c Assign link (via a data module) to node-1a-ppp
d Assign processor channels
e Assign IP Route to node-3
DEFINITY
ECS R8r
ppp
Switch 1
DEFINITY ECS
Switch 3
DEFINITY ECS
Switch 2
R8si
Hub
Ethernet
R8csi
C-LAN(b)
C-LAN
ppp
node-1b-eth
node-3
node-1a-ppp
node-2
node-1a
node-1b
DS1
C-LAN
DS1
C-LAN(a)