Filter
Top Products
IP Trunk Administration
429
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
F IP Trunk Installation and
Administration
12 In the Destination Address (IP) field, type the Internet Protocol (IP) address of the
destination IP Trunk on the remote switch.
13 In the Port field, type the port number to be used for this connection. The port
number used in all IP Trunk servers is “5000”.
14 Click OK.
The Add Originating Entry dialog box closes and the Dial/Routing Plan dialog
box appears showing the information you entered.
Repeat the above steps for each originating entry (line or dialed string) specified in
the Dial/Routing Plan Worksheets and/or the Procedures for Extension Dialing
Between Sites.
Incoming calls
To administer routing for incoming (terminating) calls, start at the Windows NT
desktop:
1 Double-click the Configuration Manager icon. The Configuration Manager
appears.
2 Click the Dial/Routing Plan tab.
The Dial/Routing Plan dialog box appears.