Lucent Technologies Release 8.2 Server User Manual


 
QSIG B Private Networking
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
388
Attendant Control of Trunk Group Access
Attendant control of trunk group access for QSIG-CAS functions as for RLT-CAS.
Attendant Crisis Alert
Attendant crisis alert for QSIG-CAS functions as for RLT-CAS.
Attendant Direct Extension Selection With Busy Lamp (standard and enhanced)
For QSIG-CAS the DXS allows attendants to use the DXS for monitoring and
placing calls to users on the main PBX and for placing calls to users on a branch
PBX only when UDP is used.
Attendant Group and Tenant Partitioning
Attendant Group and Tenant Partitioning are local features that do not require
QSIG signaling on the main.
Attendant Group and Tenant Partitioning do not function on a CAS branch. You
can administer tenant partitioning and multiple attendant groups on a branch PBX.
However, all attendant-seeking calls at the branch PBX are directed to the
QSIG-CAS number, as administered on the console-parameters form, regardless
of any tenant partition. If the QSIG-CAS number corresponds to the Dial Access
to Attendant number at the main or to a VDN that eventually routes to the Dial
Access to Attendant number at the main, the call is directed to the attendant group
assigned to the tenant partition of the incoming trunk to the main.
Attendant Interposition Calling and Transfer
Attendant Interposition calling and transfer is a local feature that remains
unchanged by QSIG-CAS. Attendants on the main still have the ability to call and
transfer to each other using Individual Attendant Extensions.
Attendant Intrusion
As with RLT-CAS, Intrusion is not be available in QSIG-CAS to calls that are
incoming from a branch.
Attendant Misoperation
Misoperation is used only in France and Italy. It is a local feature and functions as
for RLT-CAS. If the system goes into Night Service while an attendant has a call
on hold, the call realerts at the attendant console. If it is unanswered after an
administrable amount of time, the call begins alerting at the night service
destination.
Attendant Override of Diversion
As with RLT-CAS, Override of Diversion is not available in QSIG-CAS for calls
incoming from a branch.
Attendant Recall
As with RLT-CAS, Attendant Recall is not available in QSIG-CAS to calls
incoming from the branch.