Filter
Top Products
Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)
<—ethernet—> R8si
199
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
3 C-LAN Administration
Switch 3 Task — Assign Link via ethernet Data Module to the LAN
This task administers an ethernet data module on Switch 3 for the ethernet connection
to Switch 1. The data module associates a link number with a port address, extension
number, and node name for the C-LAN port used for this connection.
Begin
Steps
> Open Data Module form — enter a da n
> Enter values
> Submit the screen
End
add data next
Page 1 of X
DATA MODULE
Data Extension: 3901 Name: ethernet on link 1 BCC: 2
Type: ethernet
Port: 01a0517_
Link: 1
Network uses 1’s for broadcast addresses? y
Field Conditions/Comments
Type: This indicates the data-module type for this connection.
Port: Ethernet connections must be assigned to port 17 on the
C-LAN circuit pack.
Link: The link number must be in the range 1 – 25 (for R8si), not
previously assigned on this switch.
Name: Information-only; appears in list generated by the "list data
module" command.
Network uses 1’s
for broadcast
addresses?
Leave the default (y) if the private network contains only
DEFINITY switches and adjuncts. Set to n only if the
network includes non-DEFINITY switches that use the 0’s
method of forming broadcast addresses. See Appendix A,
“Data Module - type ethernet” for more information about
this field.