Filter
Top Products
Networking Screens
279
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
A Screens Reference
Code Enter the circuit pack code. If there is a physical circuit pack installed in the slot, the
entry must match that of the circuit pack. If there is equipment administered on a slot,
the equipment must be removed from the circuit pack before the circuit pack can be
changed or removed.
Sfx Enter the circuit pack suffix, if applicable.
Mode This is a display-only field that shows the circuit pack mode, if applicable.
Note:
Name This is a display-only field showing the alphanumeric name of the circuit pack (such
as Digital Line).
Note: Note: When the circuit pack physically inserted in the slot differs from
what has been administered on this screen, a "#" displays between the Sfx
and Name fields.
Valid entries Usage
TN followed by a 3- or
4-digit number of a valid
DEFINITY circuit pack.
a valid ADXxxx number
a valid ASAIxx number
a valid DIGx number
LGATE
TN802 For the IP Interface assembly (TN802B/MAPD).
There must be at least two empty slots preceding the
slot administered as code TN802. The Code field for
these empty slots will automatically be populated
with DSMAPD, which must be changed to
MEDPRO for the MedPro mode of the IP
Interface/TN802B.
Valid entries Usage
B to Z
blank
Valid entries Usage
Display-only field.
Valid entries Usage
Display-only field.