Filter
Top Products
Configuration 4: R8csi <—ISDN—> R8si Gateway
<—ppp—> R8csi
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
128
> Submit the screen
End
BCC: Bearer Capability Class. This is a display-only field.
COS
The values for these fields will be specified by the system
administrator.
COR:
TN:
Node Name: The node name for the interface defined by this data module.
This must be a name entered on the Node Names screen.
Establish
Connection?
y means that this switch will be responsible for call setup for this
connection. Enter n when administering the data module for
Switch 3.
Destination
Digits:
Trunk access code (79) plus extension of data module on node-3
(2801).
Destination
Node Name:
Name of the node at the far end of this connection. This must be a
name entered on the Node Names screen
CHAP? This field enables/disables the Challenge Handshake
Authentication Protocol security mechanism on this link. If you
enter y, the system will prompt for a CHAP secret (password).
Field Conditions/Comments
2 of 2