Filter
Top Products
H.323 Trunk Administration 2 H.323 Trunks
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
46
> If using DCS, go to screen page 2
> Enter values
> Go to page 4
Note: Each signaling group can support up to 31 trunks. If you need more than
31 trunks between the same two switches, add a second signaling group
with different listen ports, and add a second trunk group. See Signaling
group assignments (page 50) for more information about the relationship
between signaling groups and H.323 trunk groups.
add trunk-group n Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none Wideband Support? n
Internal Alert? n Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member:
Send Name: n Send Calling Number: n
Used for DCS? y PBX ID: 4
Suppress # Outpulsing? n DCS Signaling: d-chan
Outgoing Channel ID Encoding: exclusive UUI IE Treatment: service-provider
Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Send Connected Number: n
Send UCID? n
Send Codeset 6/7 LAI IE? y
Field Conditions/Comments
Used for DCS? Enter y.
PBX ID: Enter the switch ID. This is the value in the
Destination Node Number field on the Dial Plan
Record screen of the remote switch.
DCS Signaling: Enter d-chan.
Note:
• Send Name
• Send Calling Number
• Send Connected Number
These fields may need to be changed if the
far-end is a non-DEFINITY switch.
add trunk-group 3 Page 4 of 10
TRUNK GROUP
Administered Members (min/max): 0/0
GROUP MEMBER ASSIGNMENTS Total Administered Members: 0
Port Code Sfx Name Night Sig Grp
1: ip H.323 Tr 1 3
2: ip H.323 Tr 2 3
3: ip H.323 Tr 3 3
4:
5: