Filter
Top Products
Configuration 4: R8csi <—ISDN—> R8si Gateway
<—ppp—> R8csi
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
142
> Submit the screen
End
BCC: Bearer Capability Class. This is a display-only field.
COS
The values for these fields will be specified by the system
administrator.
COR:
TN:
Node Name: The node name for the interface defined by this data module.
This must be a name entered on the Node Names screen.
Subnet Mask:
Establish
Connection?
n means that the switch at the remote end of this connection
(Switch 1 in this case) will be responsible for the call setup.
Enter y when administering the data module for Switch 1.
Destination
Digits:
Not needed if the “Establish Connection?” field is set to n
Destination Node
Name:
Name of the node at the far end of this connection. This must
be a name entered on the Node Names screen.
CHAP? This field enables/disables the Challenge Handshake
Authentication Protocol security mechanism on this link. If
you enter y, the system will prompt for a CHAP secret
(password).
Field Conditions/Comments
2 of 2