Lucent Technologies Release 8.2 Server User Manual


 
Configuration 5A: R8csi <—ppp—> R8r (one C-LAN)
<—ethernet—> R8si
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
152
Subnet Mask Enter the subnet mask associated with the IP address for
this IP interface. (The IP address is associated with the
node name on the Node Names screen).
In this example, leave the default subnet mask,
255.255.255.0, which indicates no subnetting for a Class
C IP address.
See the discussion of subnetting, Subnetting (page 16), in
Chapter 1 and Configuration 1: R8r <—ppp—> R8si
(page 60) in this chapter for details about subnet masks.
Gateway Addr Leave blank for this configuration. The only IP
connection to this IP interface is node-3 on Switch 3.
Node-3 is on the same subnetwork as this IP interface, so
no gateway is needed.
In general, for connectivity to other (sub)networks, enter
the address of a network node that will serve as the
default gateway to the other (sub)networks.
Net Rgn Enter the region number for this IP interface.
Field Conditions/Comments
2 of 2