Filter
Top Products
Networking Screens
289
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
A Screens Reference
Type ATM The atm signaling group type is used for atm trunks.
Virtual Path Identifier
This is a display-only field.
Virtual Channel Identifier
.
Signaling Mode
This is a display-only field.
Idle Code
.
Interface Companding
.
Page 1 of 5
SIGNALING GROUP
Group Number: 2 Group Type: atm
Max number of NCA TSC: 0
Max number of CA TSC: 0
Trunk Group for NCA TSC:
Trunk Group for Channel Selection:
Supplementary Service Protocol: a
CIRCUIT PARAMETERS
Virtual Path Identifier: 0
Virtual Channel Identifier:
Signaling Mode: isdn-pri Circuit Type: T1
Idle Code: 11111111 Connect: network
Interface Companding: mulaw
Country Protocol: 1
Protocol Version: a
DCP/Analog Bearer Capability: 3.1kHz
Internetworking Message: PROGress
Valid entries Usage
blank or 32–1023
Valid entries Usage
An 8-digit binary number.
default is 11111111
Valid entries Usage
mulaw or alaw Use mulaw in the U.S., Canada, and Japan. Use
alaw elsewhere.