Filter
Top Products
QSIG B Private Networking
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
378
See the Octel Serenade documentation for Serenade administration.
Begin
Steps
1
(Local node message center switch only) Complete the Processor Channel
Assignment screen (see Appendix A).
2 (Local node message center switch only) Complete the Message Waiting
Indication Subscriber Number Prefixes screen (see Appendix A).
3 (Local node message center switch only) Complete the Station screen as specified
in the Intuity or DEFINITY AUDIX documentation. Ensure that Page 2 of the
screen has the following field entry:
• MWI Served User Type - qsig-mwi
4 (Served user switch only) On the Hunt Group screen, set the following fields for
the AUDIX hunt group:
• Message Center - qsig-mwi
• Voice Mail Number - the desired number
• Routing Digits (for example, AAR/ARS Access Code) - the desired
number.
Digits entered in these fields should be selected so that the
processing of these digits by the served user switch results in a call
being redirected to the message center switch by an ISDN-PRI
supplementary service protocol “b” facility. For example, if the
message center switch is a DEFINITY ECS, the digits entered
should reroute the call to the AUDIX hunt group on the message
center DEFINITY ECS switch.
• Calling Party Number to AUDIX? - y
End