Lucent Technologies Release 8.2 Server User Manual


 
Switch-Node 4 Administration
233
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
4 Networking Example
Switch-Node 4 Administration
This section displays the filled-in screens for the administration of Switch Node 4.
Bus Bridge
DS1 Circuit Packs
page 1
change system-parameters maintenance Page 2 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
MINIMUM MAINTENANCE THRESHOLDS ( Before Notification )
TTRs: 4 CPTRs: 1 Call Classifier Ports: 0
MMIs: 0 VCs: 0
TERMINATING TRUNK TRANSMISSION TEST ( Extension )
Test Type 100: Test Type 102: Test Type 105:
ISDN MAINTENANCE
ISDN-PRI Test Call Extension: ISDN-BRI Service SPID:
DS1 MAINTENANCE
DS0 Loop-Around Test Call Extension:
LOSS PLAN ( Leave Blank if no Extra Loss is Required )
Minimum Number of Parties in a Conference Before Adding Extra Loss:
SPE OPTIONAL BOARDS
Packet Intf1? y Packet Intf2? y
Bus Bridge: 01a05_ Inter-Board Link Timeslots Pt0: 6 Pt1: 1 Pt2: 1
add ds1 1a10 Page 1 of 2
DS1 CIRCUIT PACK
Location: 01a10 Name: Switch 4 to Switch 1
Bit Rate: 1.544 Line Coding: b8zs
Line Compensation: 1 Framing Mode: esf
Signaling Mode: robbed-bit
Interface Companding: mulaw
Idle Code: 11111111
Slip Detection? n Near-end CSU Type: other