Lucent Technologies Release 8.2 Server User Manual


 
Networking Screens A Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
282
Secondary D-channel
Enter a 6- to 7-character port number associated with the DS1 Interface circuit pack
port used for secondary D-channel signaling. Displays when the Associated Signaling
field is n (indicates NFAS). The port number assigns the secondary D-channel in the
Signaling Group. For 24-channel facilities, the 24th port is assigned as the D-channel.
For 32-channel facilities, the 16th port is assigned as the D-channel.
Max Number of NCA TSC
The maximum number of simultaneous Non-Call Associated Temporary Signaling
Connections (NCA-TSCs) that can exist in the Signaling Group. This number
includes all NCA-TSCs that are administered on this screen and those NCA-TSCs
that tandem through the switch in-route to another switch in the network.
Max number of CA TSC
The maximum number of simultaneous Call Associated Temporary Signaling
Connections (CA-TSCs) that can exist in the Signaling Group. Typically, the number
of ISDN-PRI trunk group members controlled by the Signaling Group.
Trunk Group For NCA TSC
The ISDN-PRI trunk group number whose incoming call handling table will be used
to handle incoming NCA-TSCs through the Signaling Group. Enter the assigned
ISDN-PRI trunk group number whose call handling table will be used to route the
incoming NCA TSCs. (An ISDN-BRI trunk group may not be used.)
Valid entries Usage
01 through 44 (G3r) First and second characters are the cabinet number
01 through 03 (G3si)
A through E Third character is the carrier
01 through
20 Fourth and fifth characters are the slot number
16 or 24 Sixth and seventh characters are the port
blank
Valid entries Usage
0 to 256.
Valid entries Usage
0 to 400.
Valid entries Usage
1 to 99.
blank