Filter
Top Products
IP Trunk Administration
425
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
F IP Trunk Installation and
Administration
Backing up configuration manager
Lucent recommends you perform a backup to the Personal Computer Memory Card
International Association (PCMCIA) flash disk whenever you make a change in the
configuration manager. Keep the flash disk in a safe place so you can use the backup
information if your MAPD circuit pack fails or if you want to restore to a previous
known state.
Before you begin Be sure your backup PCMCIA flash disk is inserted in the MAPD circuit pack.
Instructions To perform a backup, begin at the Windows NT desktop:
1 Double-click the IP Trunk Backup Restore icon.
The IP Trunk Backup/Restore Utility screen appears.
2 In the IP Trunk Backup/Restore Utility dialog screen, click Files, Backup.
The IP trunk Backup screen appears.
3 In the IP Trunk Backup screen, click on the BACKUP button.
4 Remove the flash disk and store in a safe place.
Restoring IP trunk
Before you start 1 Remove the defective MAPD circuit pack from the switch.
2 Install the replacement MAPD circuit pack in the switch.
3 Insert the backup PCMCIA flash disk into the MAPD circuit pack.
Instructions To perform a restore, begin at the Windows NT desktop:
1 Double-click the IP Trunk Backup Restore icon.
The IP Trunk Backup/Restore Utility screen appears.
2 In the IP Trunk Backup/Restore Utility dialog screen, click Files, Restore.
The IP trunk Backup screen appears.
3 In the IP Trunk Backup screen, click on the RESTORE button.