Networking Screens A Screens Reference
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
256
Data Module Screens
The Data Module screen must be administered at both ends of a DCS connection, except for ISDN connections.
There are two types of data modules used with TCP/IP connections — ppp and ethernet. There are two types of
data modules used with BX.25 connections — the proc-intf data module is used for the csi and si models, and the
x.25 data module is used with the r model. The pdm data module is needed when the r model is connected to an si
model via x.25.
The fields that are common to two or more of the data module types are described first, followed by the screen
pictures and descriptions of the fields that are unique for a given data module type.
Common Data Module Fields
The following fields are common to two or more of data module types.
Data Extension Extension number for this data module.
Type The data module type, which determines the connection type.
Valid Entries Data Module
Types
Usage
A 1- to 5-digit
number consistent
with the Dial Plan
ppp
ethernet
procr-intf
x.25
pdm
The data extension is entered on the
command line. If next is entered on the
command instead of an extension
number, the system assigns the next
available extension number.
Valid Entries Data
Module
Types
Usage
For TCP/IP connections:
ppp and ethernet.
For X.25 connections:
proc-intf (for the csi and si
models)
x.25 and pdm (for the r-model).
ppp
ethernet
procr-intf
x.25
pdm
Enter the data module type that
is appropriate type for the
connection type and switch
model.
For an r-model connected to an
si-model via X.25, a pdm data
module needs to be
administered in addition to the
x.25 data module.