Filter
Top Products
Configuration 1: R8r <—ppp—> R8si 3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
64
> Submit the screen
End
COS
The values for these fields will be specified by the system
administrator.
COR:
TN:
BCC: Bearer Capability Class. This is a display-only field.
Node Name: The node name for the interface (C-LAN port) defined by this
data module. This must be a name previously entered on the
Node Names screen.
Subnet Mask:
Establish
Connection?
y means that this switch will be responsible for the call setup for
this connection. Enter n when administering the data module for
Switch 2.
Destination
Digits:
Trunk access code (611) plus extension of data module on node 2
(3020). If you use just the extension, then you must administer
UDP and AAR route patterns to access the correct trunk group.
Destination
Node Name:
Name of the node at the far end (Switch 2) of this connection.
This must be a name entered on the Node Names screen (on both
switches).
CHAP? This field enables/disables the Challenge Handshake
Authentication Protocol security mechanism on this link. If you
enter y, another field will appear prompting for a CHAP secret
(password).
Field Conditions/Comments
2 of 2