Filter
Top Products
Configuration 1: R8r <—ppp—> R8si 3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
66
>Submit the screen
End
Destination Node Name of the far-end node for this channel. This must be a
name entered on the Node Names screen. For ppp
connections, it must match the Destination Node Name
entered on the ppp Data Module screen.
Destination Port A value of 0 allows any available interface channel on the
destination node to be used for this connection. The
Interface Channel number for this connection on the
Switch-2 Processor Channel screen must also be set to 0.
Session - Local The Local and Remote Session numbers can be any value
between 1 and 256 (si model) or 384 (r model), but they
must be consistent between endpoints. For each connection,
the Local Session number on this switch must equal the
Remote Session number on the remote switch and vice
versa.
It is allowed, and sometimes convenient, to use the same
number for the Local and Remote Session numbers. It is
allowed, but not recommended, to use the same Session
numbers for two or more connections.
Session - Remote
Mach ID Destination switch ID identified on the dial plan of the
destination switch (in the Local Node Number field).
Field Conditions/Comments
2 of 2