Filter
Top Products
2-96
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating Environment
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> q
unknown disk type, assuming the speed is 10000 rpm
Build log filesystem at /dev/rdsk/c0t1d0s3 ...
mkfs -F ufs /dev/rdsk/c0t1d0s3 28450872 107 27 8192 1024 251 1 166 8192 t 0 -1 8 107
Cylinder groups must have a multiple of 16 cylinders with the given parameters
Rounded cgsize up to 256
/dev/rdsk/c0t1d0s3: 28450872 sectors in 9848 cylinders of 27 tracks, 107 sectors
13892.0MB in 308 cyl groups (32 c/g, 45.14MB/g, 5632 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 92592, 185152, 277712, 370272, 462832, 555392, 647952, 740512, 833072,
.
.
.
Build spool filesystem at /dev/rdsk/c0t1d0s4 ...
mkfs -F ufs /dev/rdsk/c0t1d0s4 42676308 107 27 8192 1024 251 1 166 8192 t 0 -1 8 107
Cylinder groups must have a multiple of 16 cylinders with the given parameters
Rounded cgsize up to 256
/dev/rdsk/c0t1d0s4: 42676308 sectors in 14772 cylinders of 27 tracks, 107 sectors
20838.0MB in 462 cyl groups (32 c/g, 45.14MB/g, 5632 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 92592, 185152, 277712, 370272, 462832, 555392, 647952, 740512, 833072,
.
.
.
Remove any existing entry in /etc/vfstab for c0t1d0s3 or c0t1d0s4
Adding entries to /etc/vfstab
Mounting /opt/CiscoMGC/var/log
Mounting /opt/CiscoMGC/var/spool
Success!!!
This completes the installation of the Log and Spool File system. Go to Table 2-2 on page 2-72 if you
want to continue with the list for package installation.