Filter
Top Products
D-18
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix D Sample Installation Scripts
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1)
# are different on the two MGC hosts
*.IP_NextHop1 = 0.0.0.0
*.IP_NextHop2 = 0.0.0.0
*.IP_NextHop3 = 0.0.0.0
*.IP_NextHop4 = 0.0.0.0
*.IP_NextHop5 = 0.0.0.0
*.IP_NextHop6 = 0.0.0.0
*.IP_NextHop7 = 0.0.0.0
*.IP_NextHop8 = 0.0.0.0
*.netmaskPeerB = 255.255.255.255
*.netmaskPeerA = 255.255.255.255
*.netmaskLocalB = 255.255.255.255
*.netmaskLocalA = 255.255.255.255
*.Peer_NextHop1 = 0.0.0.0
*.Peer_NextHop2 = 0.0.0.0
*.Peer_NextHop3 = 0.0.0.0
*.Peer_NextHop4 = 0.0.0.0
*.Peer_NextHop5 = 0.0.0.0
*.Peer_NextHop6 = 0.0.0.0
*.Peer_NextHop7 = 0.0.0.0
*.Peer_NextHop8 = 0.0.0.0
################################################################
# Improved SIP Failover Support. Setting 0.0.0.0 to both will disable
# the SIP Improved failover support Feature. Configuring only one will
# cause the switchover, if the physical interface where it present fails.
#
*.Virtual_IP_Addr1 = 10.0.242.220 # 0.0.0.0 # Must be from *.IP_Addr1
Subnet.
*.Virtual_IP_Addr2 = 0.0.0.0 # Must be from *.IP_Addr2 Subnet.
################################################################
*.geoSeparation = false # Geographical separated? or not.
# To disable sip failover, you have to set both Virtual_IP_Addr* to 0.0.0.0.
# Set *.sipFailover=false does not always mean sip failover is disabled.
#
*.sipFailover = false # Failover if SIP Service fails.
*.stPort = 0
engine.SysVirtualSwitch = 1 # = 0 # 0=Nailed-Up, 1=Switched-MGC,
2=Switched-JCS
pom.dataSync = false # don't synch slave data with master
foverd.ipLocalPortA =0
foverd.ipPeerPortA =0
foverd.ipLocalPortB =0
foverd.ipPeerPortB =0
*.numberOfThreads = 2
#############################
# Sub System component version
*.subSysCompVer = 12.a
#############################
#------------------
# CVT Parameters
#------------------
#*.OwnClli = TTTT-SS-BB-XXX
#*.OwnClli = 1-22-33-444
# REQUIRED STARTUP PARAMETERS