Filter
Top Products
A-28
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
engine.ShortDurationCallPeriod Allows you to specify the period used to determine a short
duration call. Calls with a duration less than the specified
value are recorded as a short duration call in the CDR.
Default: 0
Valid values are: 0–30. A setting of 0 indicates that this
parameter is disabled. Short duration calls are not recorded
in the CDR when this parameter is disabled.
engine.StartUpAuditEnabled Audit is automatically invoked at
Cisco PGW 2200 Softswitch startup.
When the value is set to true the
Cisco PGW 2200 Softswitch automatically starts audit
when it comes up as the active host. This does not apply to
the standby host.
Default: false
engine.SysCdrCollection Designates the format of CDRs.
Values:
• true—Invalid for Release 7.4 and above.
• false—Generates binary format CDRs (default)
Default: false
Note Do not change this value. Setting this to a value of
true for Release 7.4 and higher is not valid and may
have deleterious effects on the system.
engine.SysCLIval Enables or disables Calling Line Identity (CLI) validation
processing on calls.
Values:
• true— Enables CLI validation
• false—Disables CLI validation
Default: false
engine.SysGeneratedCode Determines whether compiled or interpreted code is used.
Values:
• true—System uses compiled code.
• false—System uses interpreted code.
Default: true
Note Compiled code runs faster than interpreted code.
Typically, this value should be true. If your
configuration uses multiple CPUs, this value must be
true.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition