Filter
Top Products
3-15
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher
Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases
**************************************************
Do you want to reboot the machine now? (y/n) [N]
Step 9 Enter y and press Enter to reboot the system and reset your security settings.
Step 10 Enter eject and press Enter to open the CD-ROM drive door once the system has completed the reboot.
Remove the Cisco PGW 2200 Softswitch software CD from the tray.
This completes installation of the Cisco Security package on a simplex host system. If you have a
fault-tolerant system, proceed to the “Installing on a Fault Tolerant System” section on page 3-17.
Otherwise, proceed to the next step.
Note If the installation of this package returns an error code of 1 for any of the associated files, you can ignore
the error. Those files have encountered an error, but the installation is correct.
Step 11 You can now begin configuring your Cisco PGW 2200 Softswitch software in the “Using the Cisco
MGC Environment Configuration Tool” section on page 4-8.
Enabling Sudo
The Sudo application allows you to run programs with the security privileges of another user such as the
superuser. Follow these steps to enable Sudo on the Cisco PGW 2200 Softswitch:
Step 1 Enter ln -s /opt/sfw/bin/sudo /usr/bin/sudo and press Enter.
Step 2 Enter ln -s /opt/sfw/etc/sudoers /etc/sudoers and press Enter.
Note You must also have enabled sudo in step 8 of the Installing the Cisco Security Package (CSCOh020)
section.
If you need to make further changes to the sudo policy, edit the policy in /etc/sudoers.
Installing the License File
To manage licenses, Cisco PGW 2200 Softswitch provides license files that are stored in a directory
where Cisco PGW 2200 Softswitch obtains the required license information.
Cisco PGW 2200 Softswitch uses the license file to enforce the capacity and features available. For more
information about License features on the Cisco PGW 2200 Softswitch, see the Licensing Features for
the PGW 2200 at:
http://www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/feature/module/9.7_3_/FlexLM.html
Note You must install the license file on both the active and the standby Cisco PGW 2200 Softswitch for it to
function properly.