Filter
Top Products
D-27
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix D Sample Installation Scripts
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3)
H248.localMID = 0.0.0.0 # MGC Message Identifier. IP address or domain name
H248.MgcHeaderAddrType = 1 # MGC H.248 Message header type. 1=IP
Address,2=Domain Name
#------------------------------------------------------------------------------
# End of XE Configuration Parameter File
#------------------------------------------------------------------------------
MML.rtrv-callinfo = 30000
Sample Configured XECfgParm.dat Files for
Cisco
PGW 2200 Softswitch Release 9.7(3)
The following sample XECfgParm.dat files for Cisco PGW 2200 Softswitch Release 9.7(3) are located
in the /opt/CiscoMGC/etc directory.
# File: XECfgParm.dat
# Copyright (c) 1997-2007 by Cisco Systems, Inc.
#
# Purpose:
#
# This file contains configuration parameters that may be accessed by
# XE application programs at run-time.
#
# All lines beginning with a '#' are comments and WILL NOT BE READ BY
# PROGRAMS. Thus application overrides of the default parameter values
# can be easily added and removed by removing/added a '#'.
#
# Copyright (c) 1997-2007 by Cisco Systems, Inc.
#------------------------------------------------------------------------------
# Default parameter values have a facility name of "*" and
# will be used if no match is found on a specific facility name
#------------------------------------------------------------------------------
# Specific Facility names are as follows:
#
# logger - Log Server
# foverd - Failover Daemon
# MML - MML
# procM - Process Manager
# cdrDmpr - CDR Dumper
# cfgM - Configuration Manager
# engine - call processing engine
# ioChanMgr - I/O Channel Managers
# pom - Provisioning Object Manager
# measM - Measurement Manager
# OPERSAGT - Operational SNMP Agent
# PROVSAGT - Provisioning SNMP Agent
# mmSAgt - Measurement Manager SNMP Agent
# almM - Alarm Manager
# replicator- Replicator
# mmdb - TimesTen Main Memory Data Base Process
# amDmpr - Alarm / Measurement Dumper
# ioChanCtl - controls all channel controllers
#
#----Special Paremeter Section----
# callver - call verification utility
# diskmonitor - disk monitor shell script
# XE - Execution Environment
#
#------------------------------------------------------------------------------