Filter
Top Products
2-142
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating Environment
Figure 2-5 Sun Fire X4600/X4600 M2 Server Back Panel
Step 4 Press Enter on the terminal device.
The login prompt similar to the following is displayed.
SUNSP0003BA84D777 login:
Note SUNSP is the prefix which is the same for all SPs. 0003BA84D777 is the Ethernet MAC address
of the particular SP. Each SP has a unique MAC address.
Step 5 Enter the default user name root. Enter the default password changeme.
The following default command prompt is displayed when you have successfully logged in.
->
Step 6 Enter the following commands.
The addresses in the commands below are examples.
cd /SP/network
set pendingipaddress=10.10.10.1
set pendingipnetmask=255.255.255.0
set pendingipgateway=10.10.10.254
set pendingipdiscovery=static
set commitpending=true
Step 7 Enter the following command and press Enter.
You can see if the configuration in Step 1 has taken effect using this command.
show /SP/network
Step 8 Connect the Ethernet cable to the 10/100 Ethernet port on the back panel of X4600 server.
See Figure 2-5.
271772
AC power
connectors (4)
10/100 Ethernet port
for net management
10/100/1000 Gigabit
Ethernet ports (4)
Serial
management
port
Video
connector
USB
connectors (2)