Filter
Top Products
2-73
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating Environment
Installing the Sparc-based Solaris 10 Patches Package (CSCOh022)
To install the Sparc-based Solaris 10 Operating System Patches package (CSCOh022):
Step 1 If you are using the CD-ROM, load the Cisco Solaris 10 Operating Environment CD into the CD-ROM
drive. Enter the following command
# pkgadd -d /cdrom/cdrom0/CSCOh022.pkg
Text similar to the following is displayed:
The following packages are available:
1 CSCOh022 Media Gateway Controller Solaris 10 Patch Cluster
(sparc) 3.0(6)
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Note You can also download the Sparc-based Solaris 10 operating system patches package
(CSCOh022) from Cisco.com. For example, download the CSCOh022 package to the /opt/SW
folder on the Sparc-based platform and use the command, pkgadd -d /opt/SW/CSCOh022.pkg.
Step 2 Press Enter to select the default value. Text similar to the following is displayed:
Processing package instance <CSCOh022> from </var/tmp/CSCOh022.pkg>
Media Gateway Controller Solaris 10 Patch Cluster(sparc) 3.0(6)
Cisco Systems, Inc.
## Executing checkinstall script.
CSCOh022 checkinstall log file at /var/tmp/CSCOh022.checkinstall.log
Platform is SUNW,Sun-Fire-V210
Using </opt/sun_install> as the package base directory.
## Processing package information.
## Processing system information.
1 package pathname is already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
The following files are already installed on the system and are being
used by another package:
* /opt/sun_install <attribute change only>
* - conflict with a file which does not belong to any package.
Do you want to install these conflicting files [y,n,?,q]
Step 3 Type y and press Enter to continue. Text similar to the following is displayed:
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <CSCOh022> [y,n,?]
Step 4 Type y and press Enter to continue. Text similar to the following is displayed:
Installing Media Gateway Controller Solaris 10 Patch Cluster as <CSCOh0022>