Filter
Top Products
A-27
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
engine.RelINAPCallsAfterSwOver Defines the treatment of INAP calls in answer state after
platform switchover. This parameter is used for calls that
require INAP interaction even after the answer state.
Currently, this parameter is used only for Prepaid INAP
calls.
Values:
• True (Release all the INAP calls after switchover)
• False (Do not release INAP calls after switchover)
Default: True
Note If the value of this parameter is set to true, the
Cisco PGW 2200 Softswitch releases all calls
immediately. If the value is set to False, the
Cisco PGW 2200 Softswitch does not take any
action for the INAP prepaid calls and these calls are
treated like any normal POTS call.
engine.LCMMdlFile Location of call processing libraries.
Default: ../lib/lcm
Note Do not change this value.
engine.MaxAuditCics Number of circuit identification codes (CICs) that can be
audited at a specified interval.
Values:
• 24—North America (T1)
• 32—Europe (E1)
Default: 32
Note Do not change this value.
engine.mdoDir Location of call processing libraries.
Default: ../lib/
Note Do not change this value.
engine.SendHardwareBlock To enable the Cisco PGW 2200 Softswitch to send
hardware-oriented blocking messages for any blocks that
originate from the media gateways:
• true—Sends hardware-oriented blocking messages for
any blocks that originate from the media gateways.
• false—Sends only maintenance-oriented blocking
messages for all blocking cases (default).
Note The parameter is automatically added to the
XECfgParm.dat file during the patch installation.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition