Filter
Top Products
D-36
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix D Sample Installation Scripts
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3)
diskmonitor.Limit = 7 # MIGRATED
diskmonitor.Threshold = 80 # MIGRATED
diskmonitor.SoftLimit = false # MIGRATED
diskmonitor.CdrRmFinished = 0 # MIGRATED
diskmonitor.OptFileSys = # list of optional filesystems to monitor (no trimming)
diskmonitor.CoreRmDays = 1 # MIGRATED
diskmonitor.CfgRmDirs = 64 # MIGRATED
diskmonitor.logPrio = Info
diskmonitor.logFileNamePrefix = diskmonitor # causes log messages to be diverted to
diskmonitor.log
diskmonitor.TimerInterval = 60 # number of seconds before starting next task
#
# The next two parameters defines when old files should be removed.
# This task is run daily at dailyStartTime.
# Only core, log, cdr, alarm and measurements files are removed by this task.
#
diskmonitor.MaxKeepDays = 0 # maximum number of days to preserve files. use 0 to keep
forever.
diskmonitor.DailyStartTime = 04:15 # daily cleaning time (local time)
diskmonitor.PreserveLogs = false # if true and softlimit = false, log files will not be
removed even if threshold is crossed. Setting SoftLimit = true negates this setting
diskmonitor.PreserveCDRs = false # MIGRATED
#--------------------------------
# call verification utility Parameters
#--------------------------------
callver.SaveArea = ../etc/cust_specific/toolkit
#--------------------------------
# ISDNBRI
#--------------------------------
ISDNBRI.tcpPingPort = 0 # MIGRATED
# default value is 0.
# tcpPing will be enabled when set a valid port value,
# suggest value is 2430
#--------------------------------
# Radius Accounting Parameters
#--------------------------------
RadiusAccounting.output = off # on/off
RadiusAccounting.numberPort = 20 # The number of local port to communicate with
radius server. The range is between 10 to 99. Default value is 20.
RadiusAccounting.smSize = 30 # size of shared memory in MB. The range is between
20 to 199. Default value is 30.
#--------------------------------
# H.248
#--------------------------------
H248.maxNumH248Links = 1000
H248.maximumActionsInTransaction = 64 # Used to set maximum number of actions in one
Transaction
H248.localMID = [CISCO.COM] # Used in message from PGW to GW
#------------------------------------------------------------------------------
# End of XE Configuration Parameter File
#------------------------------------------------------------------------------
*.CallCutoffTimerUnits = 0 # This property specifies how the callcutofftime property is
calculated.
# If the value is set to,
0: callcutofftime property is measured in hours;
1: callcutofftime property is measured in minutes;
2: callcutofftime property is measured in seconds.