Filter
Top Products
2-52
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
Note On Opteron-based platforms, you can select a terminal type from the picklist, or the default
terminal type (from the serial port) is used. We recommend that you use the default terminal
while you are installing software.
Enter the number that corresponds to the terminal you are using and press Enter. For example, if you
are using an X terminal emulator, type 12 and press Enter.
The system displays information similar to the following:
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
Configuring network interface addresses: bge0 bge1 bge2 bge3.
Text similar to the following is displayed:
in.rdisc: No interfaces up
- Network Connectivity --------------------------------------------------------
Specify Yes if the system is connected to the network by one of the Solaris
or vendor network/communication Ethernet cards that are supported on the
Solaris CD. Refer to your hardware documentation for the current list of
supported cards.
Specify No if the system is connected to a network/communication card that
is not supported on the Solaris CD, and follow the instructions listed under
Help.
Networked
---------
[X] Yes
[ ] No
-------------------------------------------------------------------------------
ESC-2_Continue ESC-6_Help
Step 6 Use the arrow keys to navigate, and press the spacebar to make your selection. Verify that Yes is selected,
and press ESC-2 to continue.
Text similar to the following is displayed:
- Configure Multiple Network Interfaces ---------------------------------------
Multiple network interfaces have been detected on this system. Specify all
of the network interfaces you want to configure.
Note: You must choose at least one interface to configure.
Network interfaces
------------------
[ ] bge0
[ ] bge1
[ ] bge2
[ ] bge3
-------------------------------------------------------------------------------
ESC-2_Continue ESC-6_Help