Filter
Top Products
A-15
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
*.OwnClli Common language location identifier; used for circuit query
validation when circuit queries are supported.
Value: Alphanumeric string, up to 11 characters.
Default: TTTT-SS-BB-XXX
Example: 1111-22-33-444
*.PartialCliPnoIdentity Contains a 3-digit integer representing the PNO Identity
field of the partial CLI parameter.
Valid values: 0 (default) through 999
*.PartialCliSwitchNumber Contains a 3-digit integer representing the Switch Number
field of the partial CLI parameter.
Valid values: 0 (default) through 999
*.PartialCliTypeOfSwitch Contains a 2-digit integer representing the Type of Switch
field of the partial CLI parameter.
Valid values: 0 (default) through 99
*.platformId Enables the signaling controller to run more than one
instance of the Cisco PGW 2200 Softswitch software
concurrently.
Default: 1
Note Do not change this value.
*.popDataSync Specify true if master/slave mode is being used.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition