Filter
Top Products
A-4
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
*.ClearingLocation Specifies whether to override the default location field in the
call context for any call, regardless of which network device
released the call. This enables you to define a default
location in Release messages for any call, which can differ
from the default location set in the type definition of the
protocol.
Note This property has precedence over the value set in
the *.DefaultLocation parameter.
Values:
• 0—Normal mapping behavior, the existing Clearing
Location value from the Call Context data is used.
• 1—LOCATION_USER
• 2—LOCATION_ PRIVATE_LOCAL
• 3—LOCATION_ PUBLIC_LOCAL
• 4—LOCATION_TRANSIT
• 5—LOCATION_ PUBLIC_REMOTE
• 6—LOCATION_ PRIVATE_REMOTE
• 7—LOCATION_ INTERNATIONAL
• 8—LOCATION_ INTERWORKING
• 9—LOCATION_ LOCAL_INTERFACE
• 10—LOCATION_ LOCAL_LOCAL
• 11—LOCATION_ LOCAL_REMOTE
• 12—LOCATION_ PACKET_MANAGER
• 13—LOCATION_ UNKNOWN
Default: 0 (Normal mapping behavior)
Note Option 13 may not be valid for all solutions.
*.CPUTimerInterval Samples the frequency of CPU utilization.
This parameter is set automatically when you specify a
Cisco MGC type in the engine.SysVirtualSwitch parameter.
Any attempt to modify this parameter is overwritten.
Default: 3000 msec (3 seconds)
Note During the startup of the
Cisco PGW 2200 Softswitch software, this
parameter will be set automatically to tune the
system for optimal performance.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition