Filter
Top Products
F-7
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix F Sample LAN Configurations
Sample Configuration for Cisco Catalyst 5500 A
set spantree portvlancost 4/8 cost 3018
set spantree portvlancost 4/9 cost 3099
set spantree portvlancost 4/10 cost 3099
set spantree portvlancost 4/11 cost 3018
set spantree portvlancost 4/12 cost 3018
!
#module 5 empty
!
#module 6 empty
!
#module 7 empty
!
#module 8 empty
!
#module 9 empty
!
#module 10 empty
!
#module 11 empty
!
#module 12 : 1-port Route Switch
set module name 12
set port level 12/1 normal
set port trap 12/1 disable
set port name 12/1
set cdp enable 12/1
set cdp interval 12/1 60
set trunk 12/1 on isl 1-1005
set spantree portcost 12/1 3005
set spantree portpri 12/1 15
set spantree portvlanpri 12/1 160
set spantree portvlancost 12/1 cost 3004 4-8,11-15
!
#module 13 empty
!
#switch port analyzer
set span 2 3/23 both inpkts disable
!set span enable
!
#cam
set cam agingtime 1-4,1003,1005 300
end
Sample Configuration for Cisco Catalyst 5500 A RSM
To view the current configuration of the Cisco Catalyst 5500 A RSM, access the RSM interface, type the
following command in privileged mode, and press Enter:
Catalyst_5513A_RSM#show run
Output similar to the following appears:
Building configuration...
Current configuration:
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!