Filter
Top Products
D-32
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix D Sample Installation Scripts
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3)
#-------------
# Engine
#-------------
engine.SysPropagateChanAvail = false # MIGRATED
engine.SysGeneratedCode = true
engine.SysGRSTimerInterval = 0 # MIGRATED
engine.SysGRSBlockSize = 0 # MIGRATED
engine.SysSGCPRetryCount = 3 # max number of SGCP retry messages after failure
engine.SysSGCPRetryTimerInterval = 1000 # interval between retransmission (msec)
engine.SysCLIval = false
engine.SysToneDetect = false
engine.SysNumTrans = false
engine.SysMinOverlap = 0
engine.SysMaxOverlap = 28
engine.SysGSMTimerInterval = 10000 # MIGRATED
engine.LCMMdlFile = ../lib/lcm # LSI call model
engine.CCMdlFile = ../lib/cc # call context
engine.mdoDir = ../lib/ # where .mdo files live
engine.VersionTimeoutValue = 10000 # Interval for version messages (msec)
engine.MDLANumberScreening = 0 # MIGRATED
engine.SysMdlMemoryReduction = 1
engine.CircuitReservation = false # MIGRATED
engine.CallBackDBCleanUpTimer = 3600000 # MIGRATED
engine.SendHardwareBlock = false # MIGRATED
*.MaxNumTGAdvances = 1 # MIGRATED
*.RedirectingATree = 0
*.ClearingLocation = 0 # MIGRATED
*.DefaultLocation = 0 # MIGRATED
*.detailedCallEventCapture = 1 # MIGRATED
*.SelectTermCustGrpId = 0 # MIGRATED
# 0= Always select Originating SigPath CustGrpId
*.GlareReattemptCauseValue = 44 # MIGRATED
*.DerivedInterworkingFCIBCIEnable = 0 # MIGRATED
*.sipModeSelectionControl = 2 # 1 - B2BUA mode, allow later selection of proxy mode
via the dialplan, 2 - Fixed Proxy mode, always work in proxy mode.
#The following two lines are call based memory allocator settings.
#set these to 0 to disable call-based memory allocator
#This setting is memory efficient, but performance suffers.
#set these to 110000 for maximum performance. Memory usage increases.
engine.CALL_MEM_BLOCK_SIZE = 65536
engine.CALL_MEM_CHUNK_SIZE = 4096
# engine.SysTraceLevel = 3
*.LongCallTime = 21600000 # used to configure OnGoingCallTime in ms (6hrs
def)
engine.CDRencodingFormat = ItuCDB # MIGRATED
engine.CDRtimeStamp = S # MIGRATED
engine.CDRmessageTypes = "1010,1020,1030,1040,1050,1060,1070" # MIGRATED
engine.VersionTimeoutValue = 10000
engine.StartUpAuditEnabled = false # MIGRATED
engine.FaultRecoveryAuditTimer = 15000 # MIGRATED
engine.CustSpecificINAPHandling = null # MIGRATED
engine.DisableMultipleCDRs = 1 # MIGRATED
engine.ChargingTariffType = 0 # MIGRATED