Filter
Top Products
4-19
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 4 Configuring the Cisco PGW 2200 Softswitch Software
Configuring SNMP Support Resources
For steps on how to execute the selections from the SNMPD Configuration Main Menu, see the following
sections:
• Adding an SNMP Community Entry, page 4-17
• Deleting an SNMP COMMUNITY, page 4-19
• Adding a Trap Destination, page 4-20
• Deleting a Trap Destination, page 4-22
• Activating the New Settings, page 4-23
• Verifying the SNMP Configuration Migration, page 4-24
Note To complete the migration of the SNMP configuration to a more secure environment, see the
“Activating the New Settings” section on page 4-23.
The procedure for adding an SNMP Community Entry is now complete.
From the SNMPD Configuration Main Menu, choose option 6 (Activate the New Settings) to commit
the changes, or select other options (1 through 5) to add or delete a community name or trap.
Deleting an SNMP COMMUNITY
From the SNMPD Configuration Main Menu:
Step 1 If you select 3 (Delete an SNMP Community) from the SNMPD Configuration Main Menu, the delete
CommunityString Menu is displayed:
Note The SNMP Community Names listed in the following display are examples.
=================== Delete CommunityString Menu ===================
SnmpCommunityName CommunitySecurityName
comname1 ReadAndNotifyToAll
T555 ReadWriteAll
jammmy ReadAndNotifyToAll
-- Where:
CommunitySecurityName SecurityModel Read Write Notification
ReadWriteAll snmpv1 AllMibObjects AllMibObjects -
ReadWriteAll snmpv2c AllMibObjects AllMibObjects -
ReadAndNotifyToAll snmpv1 AllMibObjects - AllMibObjects
ReadAndNotifyToAll snmpv2c AllMibObjects - AllMibObjects
Would you like to proceed with the Delete [n]/[y]?
Step 2 Enter y to delete SNMP Community (if you enter n to cancel the deletion, you return to the SNMPD
Configuration Main Menu):
Text similar to the following is displayed: