Filter
Top Products
A-7
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
*.DisableCCBSoverTunneledQSIG Specifies the protocol used to deliver Call Back Services
messages over the network.
Valid Values:
• 0—Callback Services are enabled using QSIG
• 1—Callback Services are enabled using the QBE
interface
Default Value: 0
*.disableMeas Disables the collection of measurement data.
Values:
• true—Disables data collection
• false—Data is collected
Default: false
*.disablemultiplecdrs Allows you to disable the multiple CDRs per call (for
example, multiple occurrences of Answer and Release CDB
messages) for situations where the downstream billing
system does not support this feature.
Default: 1
Valid values are 0 (multi CDRs enabled) and 1 (multi CDRs
disabled).
*.eventTrace Used by developers only to trace events at the application
level.
*.FastConnect Allows LCM messages to pass through.
Values:
• 0—Passes all signals to LCM.
• 1—Disables signal to LCM for “CallProceeding”
received from NAS.
• 2—Disables signal to LCM for “CallProceeding” or
“Progress” received from NAS.
• 3—Disables signal to LCM for “Call Proceeding”,
“Progress,” or “Alerting” received from NAS.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition