Filter
Top Products
A-38
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
MgcHeaderAddrType Sets the Cisco PGW 2200 Softswitch H.248 local MID
address type.
Values:
• 1 = IP address
• 2 = Domain name
Default: 1
The localMID property contains related information.
MML.chg-cfg Timeout value for the chg-cfg MML command in
milliseconds; overrides MML.timeout.
Default: 10000 milliseconds
Note Do not change this value. This MML command is
obsolete.
MML.snd Timeout value for the snd MML command in milliseconds;
overrides MML.timeout.
Default: 600000 milliseconds
Note Do not change this value.
MML.startPM Timeout value for the startPM MML command in
milliseconds; overrides MML.timeout.
Default: /etc/init.d/CiscoMGC start
Note Do not change this value.
MML.stopPM Timeout value for the stopPM MML command in
milliseconds; overrides MML.timeout.
Default: /etc/init.d/CiscoMGC stop
Note Do not change this value.
MML.timeout Timeout for MML commands, in milliseconds.
Default: 10000 milliseconds
Note Do not change this value.
MML.vld-cic Timeout value for the vld-cic MML command in
milliseconds; overrides MML.timeout.
Default: 25000 milliseconds
Note Do not change this value.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition