Filter
Top Products
2-82
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating Environment
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> 0. CISCO
1. original
Specify table (enter its number)[1]:
partition> Current partition table (CISCO):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 806 - 1208 1.96GB (403/0/0) 4100928
1 var wm 1209 - 2215 4.89GB (1007/0/0) 10247232
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 swap wu 0 - 805 3.91GB (806/0/0) 8201856
4 unassigned wm 2216 - 2220 24.84MB (5/0/0) 50880
5 unassigned wm 2221 - 13683 55.62GB (11463/0/0) 116647488
6 unassigned wm 13684 - 14086 1.96GB (403/0/0) 4100928
7 unassigned wm 0 0 (0/0/0) 0
partition> Ready to label disk, continue?
partition>
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> Finished disk partitioning...
metadb: waiting on /etc/lvm/lock
d1: Concat/Stripe is setup
d2: Concat/Stripe is setup
d4: Concat/Stripe is setup
d5: Concat/Stripe is setup
d7: Concat/Stripe is setup
d8: Concat/Stripe is setup
d10: Concat/Stripe is setup
d11: Concat/Stripe is setup
d13: Concat/Stripe is setup
d14: Concat/Stripe is setup