Filter
Top Products
5-9
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8
Migration from Release 9.5 or 9.6 to Release 9.8 without Platform Changes
Caution Do not load Solstice DiskSuite (CSCOh023) if you are using Veritas Volume Manager to use the second
disk for Solaris 8 fallback. For more information about Veritas Volume Manager, refer to
http://www.sun.com/products-n-solutions/hardware/docs/Software/Storage_Software/VERITAS_Volu
me_Manager/index.html.
Restoring Data Files
Follow these instructions to restore the Cisco PGW 2200 Softswitch configuration files (MGC.tar) on
PGW host 2:
Step 1 Log in as root and move the Cisco PGW 2200 Softswitch configuration files to the /tmp directory.
# cd /var/tmp
Step 2 Create a mount point.
# mkdir saved
# cd /var/tmp/saved
Step 3 Store the data files:
a. Local tape drive—Store the files on a local tape drive.
# tar xvf /dev/rmt/0
b. Remote file server—Using the ftp utility, transfer the MGC.tar and ttbackup.tar files from the
remote file server to the /tmp/saved directory.
Note Use the binary mode of ftp to transfer the MGC.tar and ttbackup.tar files.
Step 4 Verify that the files successfully transfer to the remote file server before continuing.
Step 5 Create an MGC directory and extract Cisco PGW 2200 Softswitch data files:
# cd /opt
# mkdir CiscoMGC # Create MGC directory
# cd /opt/CiscoMGC
# mkdir snmp # Create snmp directory
# cp /var/tmp/saved/MGC.tar MGC.tar
# tar xvf MGC.tar # Extract MGC data files
# mkdir local # Create snmp directory
# cp /var/tmp/saved/ttbackup.tar ./local/ttbackup.tar
Step 6 Verify that the etc and dialPlan directories are present.
Step 7 If you saved the snmpd.cnf file, copy the file to the /opt/CiscoMGC/snmp directory:
# cp /opt/CiscoMGC/dialPlan/snmpd.cnf /opt/CiscoMGC/snmp
Step 8 Enter the following command to reboot the Cisco PGW 2200 Softswitch:
# init 6
Installing and Verifying the Cisco PGW 2200 Softswitch Software
Follow these steps to install the Cisco PGW 2200 Softswitch software on PGW host 2: