Cisco Systems PGW 2200 Switch User Manual


 
D-13
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix D Sample Installation Scripts
Sample Configured snmpd.cnf File
# Improved SIP Failover Support. Setting 0.0.0.0 to both will disable
# the SIP Improved failover support Feature. Configuring only one will
# cause the switchover, if the physical interface where it present fails.
#
*.Virtual_IP_Addr1 = 0.0.0.0 # Must be from *.IP_Addr1 Subnet.
*.Virtual_IP_Addr2 = 0.0.0.0 # Must be from *.IP_Addr2 Subnet.
################################################################
*.geoSeparation = false # Geographical separated? or not.
# To disable sip failover, you have to set both Virtual_IP_Addr* to 0.0.0.0.
# Set *.sipFailover=false does not always mean sip failover is disabled.
#
*.sipFailover = false # Failover if SIP Service fails.
*.stPort = 0
engine.SysVirtualSwitch = 1 # 0=Nailed-Up, 1=Switched-MGC, 2=Switched-JCS
##### Last modified by mgcusr using MGC Setup Tool: Wed Sep 24 08:22:22 GMT 2008
engine.SysVirtualSwitch = 1 # 0=Nailed-Up, 1=Switched-MGC, 2=Switched-JCS
pom.dataSync = false # don't synch slave data with master
foverd.ipLocalPortA =0
foverd.ipPeerPortA =0
foverd.ipLocalPortB =0
foverd.ipPeerPortB =0
##### *.numberOfThreads = 2
##### Last modified by mgcusr using MGC Setup Tool: Wed Sep 24 08:22:22 GMT 2008
##### *.numberOfThreads = 2
##### Last modified by mgcusr using MGC Setup Tool: Wed Oct 22 07:22:03 GMT 2008
*.numberOfThreads = 1
Sample Configured snmpd.cnf File
The following shows a sample snmpd.cnf file.
Note This sample configuration enables both snmpv1 and snmpv2 traps. Therefore, you will see two coldStart
traps when the software is initialized—one for version1 and one for version 2.
# Entry type: sysDescr
# Entry format: octetString
sysDescr "SNMPv3 agent from Cisco Systems, Inc."
# Entry type: sysObjectID
# Entry format: OID
sysObjectID transpath
# Entry type: sysLocation
# Entry format: octetString
sysLocation "Herndon, Virginia"
# Entry type: sysContact
# Entry format: octetString
sysContact "Cisco Systems, Inc. +1 703 484 3000"
# Entry type: sysName
# Entry format: octetString
sysName "NSSU - MGC"
# Entry type: snmpEnableAuthenTraps