Filter
Top Products
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
interface
interface
Enter the keyword interface then the interface type and
slot/port or number information:
• For a port channel interface, enter the keywords port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
Example
Dell# show ipv6 neighbors
IPv6 Address Expires(min)
Hardware Address State Interface VLAN CPU
---------------------------------------------------------------
-----------------------------------------------
100::1 0.03
00:00:00:00:00:22 DELAY Te 1/12 - CP
fe80::200:ff:fe00:22 232
00:00:00:00:00:22 STALE Te 1/12 - CP
500::1 0.60
00:01:e8:17:5c:af REACH Te 1/13 - CP
fe80::200:ff:fe00:17 232
00:00:00:00:00:29 REACH Te 1/14 - CP
900::1 0.60
00:01:e8:17:5c:b1 STALE Po 23 - CP
400::1 0.60
IPv6 Basics
1041