Filter
Top Products
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a
configured prefix list. For more information, refer to the
show ip route list command.
protocol (OPTIONAL) Enter the name of a routing protocol (bgp,
isis, ospf, rip) or the keywords connected or static.
NOTE: bgp, isis, ospf, and rip.
• If you enter bgp, you can include the BGP as-number .
• If you enter isis, you can include the ISIS routing-
tag
.
• If you enter ospf, you can include the OSPF process-
id
.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain
routing tag must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
all (OPTIONAL) Enter the keyword all to view both active and
non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes
the ip route command configures.
summary (OPTIONAL) Enter the keyword summary. For more
information, refer to the show ip route summary command.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
IPv4 Routing
979