Filter
Top Products
neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} activate
To disable, use the no neighbor {ipv6-address | peer-group-name}
activate command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Identify a peer group by name.
activate Enter the keyword activate to enable the identified
neighbor or peer group in the new AFI/SAFI.
Defaults Disabled.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
By default, when you create a neighbor/peer group configuration in the Router
BGP context, it is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the
new context, the neighbor/peer group is enabled for AFI/SAFI.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} advertisement-
interval seconds
To return to the default value, use the no neighbor {ipv6-address | peer-
group-name} advertisement-interval command.
Border Gateway Protocol
537