Filter
Top Products
Line Beginning
with
Description
• Bad pkts rcvd displays the number of invalid packets
received on the interface.
Virtual MAC
address
Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which
the interface is connected.
Tracking states... Displays information on the tracked interfaces or objects
configured for a VRRP group (track command), including:
• UP or DOWN state of the tracked interface or object (Up
or Dn).
• Interface type and slot/port or object number,
description, and time since the last change in the state of
the tracked object.
• Cost to be subtracted from the VRRP group priority if the
state of the tracked interface/object goes DOWN.
Example
Dell#show vrrp ipv6
------------------
TenGigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net:
fe80::201:e8ff:fe7a:6bb9
VRF: 0 default-vrf
State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9
(local)
Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
Accept Mode: FALSE, Master AdvInt: 100 centisec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
Virtual MAC address:
00:00:5e:00:02:ff
Virtual IP address:
1::255 fe80::255
vrrp-ipv6-group
Assign an interface to a VRRP group.
Z9500
Syntax
vrrp-ipv6-group vrid
Parameters
vrid Enter the virtual-router ID number of the VRRP group. The
VRID range is from 1 to 255.
Defaults Not configured.
Command
Modes
INTERFACE
1904
Virtual Router Redundancy Protocol (VRRP)