Filter
Top Products
1d 02:26:50:179846:qsfp-6 eeprom attempting to read on from
iic at : 24
1d 02:26:50:187498:qsfp-7 eeprom attempting to read on from
iic at : 23
1d 02:26:50:202989:qsfp-11 eeprom attempting to read on from
iic at : 18
1d 02:28:50:440146:qsfp-0 eeprom attempting to read on from
iic at : 17
1d 02:28:50:447933:qsfp-1 eeprom attempting to read on from
iic at : 16
1d 02:28:50:455505:qsfp-2 eeprom attempting to read on from
iic at : 15
1d 02:28:50:463233:qsfp-3 eeprom attempting to read on from
iic at : 14
1d 02:28:50:470881:qsfp-6 eeprom attempting to read on from
iic at : 24
1d 02:28:50:478591:qsfp-7 eeprom attempting to read on from
iic at : 23
1d 02:28:50:493790:qsfp-11 eeprom attempting to read on from
iic at : 18
1d 02:30:50:675435:qsfp-0 eeprom attempting to read on from
iic at : 17
1d 02:30:50:683019:qsfp-1 eeprom attempting to read on from
iic at : 16
Usage
Information
This command displays internal software driver information, which may be useful
during troubleshooting switch initialization errors, such as a downed port pipe.
terminal monitor
Configure the system to display messages on the monitor/terminal.
Z9500
Syntax
terminal monitor
To return to default settings, use the terminal no monitor command.
defaults Disabled.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1752
Simple Network Management Protocol (SNMP) and Syslog