Filter
Top Products
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
show interface ets
Displays the ETS configuration applied to egress traffic on an interface, including priority groups with
priorities and bandwidth allocation.
Syntax
show interface port-type fortyGigE/tenGigE X/x ets detail
Parameters
interface Enter the port-type which can be ten GigE or forty GigE and
port ETS information.
detail Enter key details for a full list of results.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
Usage
Information
NOTE: Please note that the show interface ets detailsare updated
with Minimum and Maximum bandwidth details.
Example
(Summary)
Example
(Detail)
Dell#show interface fortyGigE 0/36 ets detail
Interface fortyGigE 0/36
Max Supported PG is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
PG-grp Priority# BW-% BW-COMMITTED
BW-PEAK TSA
% Rate(Mbps) Burst(KB)
Rate(Mpbs) Burst(KB)
---------------------------------------------------------------
Data Center Bridging (DCB)
615