Filter
Top Products
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage
Information
There are three line cards (0-2) with fixed ports on the Z9500. Line card 0 uses
three sets of ports (port pipes): 0 to 2; line cards 1 and 2 use four sets of ports: 0 to
3.
• On line card 0, port set 0 consists of ports 0–44; port set 1 consists of ports
48–92; port set 2 consists of ports 96–140.
• On line cards 1 and 2, port set 0 consists of ports 0–44; port set 1 consists of
ports 48–92; port set 2 consists of ports 96–140; port set 3 consists of ports
144–188.
To display the per-protocol counters of rate-limited control-plane traffic at the
aggregated (switch) or line card and port set level, use the show control-
traffic protocol command.
Example
Dell#clear control-traffic protocol cp-switch counters
Dell#
clear control-traffic queue
Clear per-queue counters of rate-limited control-plane traffic.
Z9500
Syntax
clear contol—traffic queue {all | queue-number} counters
Parameters
all Enter the keyword all to clear counters for rate-limited
traffic on all CPU queues, including Route Processor, Control
Processor, and line-card CPUs.
queue-number Enter the queue number to clear counters for rate-limited
traffic on a specified CPU queue. The range of queue-
number values is from 0 to 23. The twenty-four control–
plane queues are divided into groups of eight queues for the
Route Processor, Control Processor, and line-card CPUs as
follows:
• Queues 0 to 7 process packets destined to the Control
Processor CPU .
590
Control Plane Policing (CoPP)