Filter
Top Products
aggregate-address
Summarize a range of prefixes to minimize the number of entries in the routing table.
Z9500
Syntax
aggregate-address ipv6-address prefix-length [advertise-map
map-name] [as-set] [attribute-map map-name] [summary-only]
[suppress-map map-name]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map followed
by the name of a configured route map to set filters for
advertising an aggregate route.
as-set (OPTIONAL) Enter the keywords as-set to generate path
attribute information and include it in the aggregate.
AS_SET includes AS_PATH and community information from
the routes included in the aggregated route.
attribute-map
map-name
(OPTIONAL) Enter the keywords attribute-map followed
by the name of a configured route map to modify attributes
of the aggregate, excluding AS_PATH and NEXT_HOP
attributes.
summary-only (OPTIONAL) Enter the keywords summary-only to advertise
only the aggregate address. Specific routes will not be
advertised.
suppress-map
map-name
(OPTIONAL) Enter the keywords suppress-map followed by
the name of a configured route map to identify which more-
specific routes in the aggregate are suppressed.
Defaults Not configured.
Command
Modes
CONFIGURATION-ROUTER-BGPV6-ADDRESS FAMILY
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Border Gateway Protocol
505