Filter
Top Products
Related
Commands
login concurrent-session — Configures the limit of concurrent sessions for all users
on console and virtual terminal lines.
show login statistics — Displays login statistics of users who have used the console
or virtual terminal lines to log in to the system.
logging coredump server
Configure the switch to move (upload) a core dump for an application or kernel crash to an external FTP
server.
Z9500
Syntax
logging coredump server {ipv4-address | ipv6-address} username
name password [type] password
Parameters
{ipv4-address |
ipv6-address}
Enter the server IPv4 address (A.B.C.D) or IPv6 address
(X:X:X:X::X).
name Enter a username to access the target server.
type Enter the password type:
• Enter 0 to enter an unencrypted password.
• Enter 7 to enter a password that has already been
encrypted using a Type 7 hashing algorithm.
password Enter a password to access the target server.
Defaults Core dumps for kernal and application crashes are stored in the local flash of the
Z9500 Control Processor CPU.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version 9.0(1.0) Introduced on the S5000.
Usage
Information
The Z9500 supports full core dumps for kernel crashes. The kernel core dump
applies to all Z9500 CPUs and is not enabled by default. To enable full kernel core
dumps, enter the logging coredump command in global configuration mode.
Control and Monitoring
125