Filter
Top Products
Parameters
outgoing-port-
channel
number
Enter the keywords outgoing-port-channel then the
number of the port channel to display flow information.
• For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
incoming-
interface
interface
Enter the keywords incoming-interface then the
interface type and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
source-ip
address
Enter the keywords source-ip then the IP source address
in IP address format.
destination-ip
address
Enter the keywords destination-ip then the IP
destination address in IP address format.
source-port
number
Enter the keywords source-port then the source port
number. The range is from 1 to 65536. The default is None.
destination-
port number
Enter the keywords destination-port then the
destination port number. The range is from 1 to 65536. The
default is
None.
source-mac
address
Enter the keywords source-mac then the MAC source
address in the nn:nn:nn:nn:nn:nn format.
destination-
mac address
Enter the keywords destination-mac then the MAC
destination address in the nn:nn:nn:nn:nn:nn format.
vlan vlan-id Enter the keywords vlan then the VLAN-id. The range is
from 0 to 4094.
ether-type Enter the keywords ether-type in the XX:XX format.
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
902
Interfaces